Graph Paper Free · no signup · no watermark · true to size

Free Printable Coordinate Graph Paper

Generate a four-quadrant grid with x and y axes. Each square represents one coordinate unit; choose physical spacing separately.

——
Your sheet
—
5 mm
A4
Square size
Custom size
Unit
Paper
Orientation
Advanced settings
Sizing mode
Heavy line every
Copies per PDF
Line colour
Preset
Margin (mm)
Line / dot size (mm)
Custom line colour

Direct PDF link for sharing or scripts: printgridpaper.com/api/pdf?size=5mm&paper=a4

Choose your sheet

Generate a four-quadrant grid with x and y axes. Each square represents one coordinate unit; choose physical spacing separately.

Start with 5 mm on A4, or use 1/4 inch on Letter. Set a lighter colour for pencil work. Keep the measuring bars enabled when physical dimensions matter.

Square grid generator · Dot grid · Coordinate grid

Your printer is probably shrinking the page

Print dialogs may use Fit to page, which changes the size of the grid. The amount depends on your paper and printer settings. On a 5 mm grid that turns every square into 4.7 mm. It is small enough to go unnoticed and large enough to ruin a scale drawing, a knitting chart, or a floor plan. Change this one setting before you print.

Chrome / Edge

Open More settings, find Scale, switch it from Default to Custom and type 100.

Adobe Acrobat

Under Page Sizing & Handling choose Actual size. Do not leave it on Fit or Shrink oversized pages.

Safari / macOS Preview

Expand the dialog, set Scale to 100%, and make sure Scale to Fit is unchecked.

Firefox

Open More settings and set Scale to 100 instead of Fit to page width.

Paper must match

Printing a Letter PDF onto A4 may scale or crop the page, depending on your settings. Pick the paper you actually have loaded.

Phone printing

Mobile print flows usually scale without asking and give you no control. For anything you intend to measure, print from a computer.

How to check it worked: lay a ruler on the two bars at the bottom of the sheet. The upper one must read 100 mm and the lower one 4 inches. If both are short by the same proportion, the page was scaled — fix the setting and print again. The bars help you verify the physical size before using a sheet for measured work.

Which square size do you need?

Each size has its own page, with the exact measurements, how many squares fit on each sheet, what it is normally used for and which sizes it gets mistaken for. Or type any value into the custom field above — metric or imperial, no size is off limits.

Questions

Why doesn't my printed graph paper measure correctly?

Check print scaling first. Fit to page may shrink the grid, depending on your printer, paper and settings.

The measuring bars on every sheet here exist to catch exactly this. If the metric bar reads 96 mm instead of 100, your page was scaled to 96 percent and every square is 4 percent small.

What is the difference between graph paper, grid paper and quad paper?

They describe the same thing. Quad paper is the common US name for a square grid, usually 1/4 inch. Graphing paper and squared paper are used interchangeably elsewhere. Millimetre paper normally means a 1 mm grid with heavier lines every 5 or 10 mm.

Should I choose A4 or Letter?

Choose whichever is loaded in your printer. A4 is standard in Europe, Asia, Australia and most of the world; Letter is standard in the US and Canada. Printing on a different paper size may scale or crop the sheet, depending on the settings.

Is it free, and can I use it for work?

Yes to both. There is no signup, no watermark and no limit on how many sheets you generate. The PDFs are plain vector line work and you are free to use them for schoolwork, client work or anything else.

Why is the file so small?

The PDF is drawn as vector lines rather than an image, so a full sheet is only a few kilobytes. It also means the grid stays perfectly sharp at any zoom level and prints at your printer's full resolution instead of whatever a picture happened to be saved at.

Can I get a size that isn't listed?

Yes. Type any number into the custom size field and switch the unit between millimetres and inches. The sheet is rebuilt as you type, and the preview always shows exactly what the PDF will contain.